A regular Client behind the ISP Router accesses the Internet through the unprotected red path.
The ISP can log the traffic from this client.
The router establishes the blue IPredator connection.
The Client behind the IPredator VPN uses the yellow protected path through IPredator to access the Internet.
Because the traffic inside the blue tunnel is encrypted, your ISP cannot look into the traffic that the Client behind IPredator generates.
The ISP only sees encrypted packets traveling back and forth to IPredator.
In the Services > VPN panel enable the OpenVPN Client.
A couple of settings need to be set manually:.
Server pool public:
UDP (default) / TCP
User Pass Authentication:
Enter IPredator credentials
Notice that the NAT pool VPN servers are configured.
DD-Wrt is bad at updates and to prevent local services that are not firewalled to be accessible on the VPN interface not assigning a public IP address is a quick fix.
If the router should have a publicly accessible IP address choose to set the default pool ipv6.openvpn.ipredator.se and make sure you have proper firewall rules in place.
Enable the Advanced Options and set the following options:
If you experience any problem after using this guide, please check our Problem Guide and the FAQ first.
An overview of the OpenVPN settings detailing technical aspects a bit more in depth and some tweaks is available here.
This guides configuration connects your client to our OpenVPN service via UDP. As outlined in the OpenVPN settings, connecting via TCP and/or to different ports is also supported.
TCP is needed if you have to go through a HTTP proxy to reach our servers or if your provider rate-limits UDP connections on port 1194.
If your problem is still not solved please visit the online chat or use the Help Wizard to contact the support.